Xlite Configuration For Mac

0704

Feb 19, 2017  X-Lite (Mac) X-Lite is a free softphone that enables you to make and receive calls with your Telzio service on your Mac computer. Telzio works with all SIP compatible softphones, including X-Lite by Counterpath. Home VoIP CUCME How to configure Free SIP Phone X-Lite on. Here is a X-Lite free SIP phone configuration guide for Cisco CME(CUCME) 8.6. Id mac 0000.0000.0001. Gogasca - can you please let us know how your testing with XLite on the Mac and a UC 520 went? Also, can you post the proper configuration settings for PC and/or Mac based XLite clients for the UC520? That would be REALLY helpful! X-Lite is designed for you to try out some of the feature-rich capabilities available in our award-winning Bria softphone. Please note that X-Lite does not come with a voice, video or messaging service – you must pair it with a VoIP service or IP PBX in order to make calls or send messages.

September 2017 This article is for the X-Lite 4.9.8 Build 84253 - 2017. For previous editions, please see Step 1: Gather information for each user. Each user has a set of credentials which will be needed to configure each phone. For each phone that you are configuring, obtain the following: • 'SIP Address' (Address of Record) • 'SIP Password' • 'Auth Username' • 'Username' • 'Domain' • 'Outbound Proxy' You can find this information in the user detail pages under the 'Users' tab in the 'Phone Configuration' section. Macbook

Xlite Configuration For Mac Os X

Step 2: Configure your Xlite software settings. When you first load the device you'll be informed there is no account information and provided a link to set up your account. On subsequent attempts to set up the software, you will need to locate the 'Preferences' / 'Options' tab. Enter the following information from Step 1 above: • Account name --> call it 'OnSIP' • Username --> ' Username' • Domain --> ' Domain' • Password --> ' SIP Password' • Display Name --> Whatever you would like • Authorization name --> ' Auth Username' • Domain Proxy --> put checkmark here • Proxy Address --> 'sip.onsip.com' Step 3. Confirm that you have disabled all Network Address Translation (NAT) settings on the phone. We handle all NAT related issues. So, make sure to turn off any NAT settings on the phone in order for your phone to communicate properly with our servers.

Click Topology tab, then select 'NONE' for Firewall Traversal Method: Now hit the 'OK' button at the bottom. Setting Signaling Transport Select Transport tab, change Signaling Transport to UDP, then OK Step 5. Setting DTMF Properly DTMF is the sound a phone makes when you push a number on a phone, used predominantly for phone menu navigation. Our system uses RFC 2833 to send DTMF. You set this by clicking on Preferences -->selecting Calls --> Send via RFC2833, then OK Step 6. Setting Codecs Click on Preferences -->selecting Audio Codecs --> SPEEX Wideband -->select only G711 uLaw, G711aLaw, G.722, and GSM then OK: Step 7.

Setting Re-Registration Period. The default setting is 10-seconds and should be modified to 3600-seconds. To do this: Preferences -> Accounts -> Advanced ->Register Every (make change here) Step 8. Confirm that your phone is registered. In the 'User' portal, click on the 'Users' tab.

Zyxel Pla Series Configuration For Mac

Xlite download for mac

Linksys Router Configuration For Mac

You will see a green 'online' notation next to each user with a registered phone. You should now be able to place and receive calls remember to start your outbound call with a '1' followed by next 10-digits. Kenshin new kyoto arc download for mac. See our top business VoIP phone recommendations.

This entry was posted on 04.07.2016.