The fact is that only HP Rack System/E series UPS-es are supported on HP-UX. R3000 XR for HP-UX is J4367A - a modified original R3000 XR with mounting rails for Rack System/E and probably modified firmware. Find support options including software, drivers, manuals, how to and troubleshooting information for your HP Accessories & Parts. Click here to see reports of other supported models from HP. When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc will get a red dashed outline or red solid left border. Find great deals on eBay for hp r3000 xr. Canon dr 2020u wia driver. Shop with confidence. I did a self Test on a R3000 XR UPS and have been recieving the following message on each job that runs. The UPS Management software shows no change in the power out and Load (at 50%). Tape Alert : The voltage supply to the library is outside the specified range.
Hp R3000 Xr Drivers For Macbook Pro
Thanks again guys. English french dictionary free download. My UPS works like a charm now!
Dear Users, i'm hardly trying to figure out howto setup a link to the R3000 XR UPS. I use Debian Lenny with apcupsd Software v. 3.14.4 with the following settings: UPSCABLE 940-0020B UPSTYPE dumb DEVICE /dev/ttyS0 but i dont get a reasonable output in my webfrontend apcupsd-cgi. Please see below the output of apcaccess. I would expect to see some battery status.
R3000 Xr Erm
Nagios:/home# apcaccess APC: 001,019,0491 DATE: Tue May 26 13:01:18 CEST 2009 HOSTNAME: nagios RELEASE: 3.14.4 VERSION: 3.14.4 (18 May 2008) debian UPSNAME: nagios CABLE: APC Cable 940-0020B MODEL: DUMB UPS Driver UPSMODE: Stand Alone STARTTIME: Tue May 26 13:01:15 CEST 2009 STATUS: ONLINE LOWBATT MBATTCHG: 5 Percent MINTIMEL: 3 Minutes MAXTIME: 0 Seconds NUMXFERS: 0 TONBATT: 0 seconds CUMONBATT: 0 seconds XOFFBATT: N/A STATFLAG: 0x07000048 Status Flag END APC: Tue May 26 13:01:34 CEST 2009 Any help is greatly appreciated. Regards stefan. On Tue, May 26, 2009 at 01:24:50PM +0200, stefan.bauer@. Wrote: > Dear Users, > > i'm hardly trying to figure out howto setup a link to the R3000 XR UPS.