How To Install A Hard Drive Sled Adapter For Mac

1122

The hard drive bay sled brackets for your first generation Mac Pro were designed to fit the large 3.5' hard drives. Pro tools le 8.0.5 mac. Now you can adapt those sleds to fit any SATA 2.5' solid state, hybrid, or standard hard drive!

It specifically says that it is not compatible with the mac pro 1,1. The SATA ports mighT not be in the exact same location in the mac pro 1,1. So the the SSD wouldn't align with them and therefore not connect. So dont risk it id say.

How to install a hard drive sled adapter for mac

Dont judge the quality of the adapter hellhammer posted because it plastic. SSD's produce literally no heat and they weigh hardly anything. It will be all you need. You wont see that adapter once its inserted incase you worrying about looks. You could also install the SSD like this guy did: Step by step guide of how to make an adapter, i did it for a friend following those instructions and it works perfectly. Click to expand.If i was planning on buying the plastic one, i would rather do the DIY project seeing how the ssd would not be enclosed.

Also i would make changes. Such as not using tape, and making the mounting part out of aluminum. Also use screws to mount the ssd to the aluminum and then use the other screws already on the sled to secure it. Thanks for the help.

Plus i know where i can get some aluminum to try this out for free lol and screws cost under $1 will post here when done sometime this month hopefully. If i was planning on buying the plastic one, i would rather do the DIY project seeing how the ssd would not be enclosed. Also i would make changes. Such as not using tape, and making the mounting part out of aluminum. Also use screws to mount the ssd to the aluminum and then use the other screws already on the sled to secure it. Thanks for the help.

How To Install A Hard Drive Sled Adapter For Macbook Air

Plus i know where i can get some aluminum to try this out for free lol and screws cost under $1 will post here when done sometime this month hopefully. Click to expand.The SSD's rectangular enclosure is made out of plastic for most of them (seem to recall Intel uses aluminum). But as mentioned, they use very little power, so they don't get hot. So if you do enclose it, it's not going to be damaged (they survive in laptops after all, and there's very little room for drives and ventilation in those vs.

How To Install A Hard Drive Sled Adapter For Mac

Windows 10 file copy utility. But if you want to go DIY, you don't even need to get that complicated. Just use Velcro or Zip Ties. Others have done this before, and it works. Pdf xchange driver for mac

How To Install A Hard Drive-in A Laptop

Combine cheap + easy + effective of either of these solutions, I don't see any real reason why more complicated and expensive is worth the effort. Just a thought anyway. After some research on the forums, it looks like there are three main ways to interface directly with the SATA connector in the Mac Pro. 2006-2008 Mac Pro: Use MaxUpgrades' for 2006-2008 machines 2009-2010 Mac Pro: Use or for 2009-2010 machines Any Mac Pro: Use for the optical bay (scroll down for Mac-specific options) Also, there are cheap 5.25' to 3.5' adapters on Newegg which would probably work in the Mac Pro optical bays. But the 3.5' to 2.5' ones probably won't work for the 4 SATA bays since the Mac Pro sleds attach to the hard drive from the large bottom surface, while most adapters are for the sides. Sony dvd rw dru 820a drivers for mac. Another possibility is the Icy Dock, but I've seen lots of complaints that the adapter is flaky due to the fact that Icy Dock is not a direct connection to the Mac Pro's SATA connector.

This entry was posted on 22.11.2016.